High quality 1-1/8" tapped base pillow block bearing. The bearing has a wide inner ring with two set screws for attaching to the shaft. Housing is cast iron with a grease zerk for re-lubing the bearing.

Diminisions:
Bore: 1-1/8"
Bolt hole to bolt hole: 3 in. (76.2mm)
Overall length: 4 in. (101.6mm)
Shaft height: 1.68 in. (42.86mm)
Overall height: 3.37 in. (85.72mm)
Bolt Size: 7/16" Thread 14TPI Depth 5/8"