This pillow block housing fits insert bearings with 130mm OD curved outer race. This housing is cast iron and has a low shaft center height compared to other pillow block housings. The housing includes a grease fitting for lubricating re-lube style bearings.

Dimensions:
Fits bearings with OD of: 130MM
Bolt hole to bolt hole: 9.48 in. (241mm)
Overall length: 11.96 in. (304mm)
Shaft height: 3.311 in. (84.1mm)
Overall height: 6.49 in. (165mm)
Bolt hole: .866 in. (22mm)