High quality 1" stainless steel pillow block bearing. The bearing is stainless steel and has a wide inner ring with two set screws for attaching to the shaft. Housing is stainless steel with a grease zerk for re-lubing the bearing.

Diminisions:
Bore: 1"
Bolt hole to bolt hole: 4.133 in. (105mm)
Overall length: 5.51 in. (140mm)
Shaft height: 1.437 in. (36.5mm)
Overall height: 2.736 in. (69.5mm)
Bolt hole: .511 in. (13mm)