High quality 1-1/2" stainless steel pillow block bearing. The bearing is stainless steel and has a wide inner ring with two set screws for attaching to the shaft. Housing is stainless steel with a grease zerk for re-lubing the bearing.

Diminisions:
Bore: 1-1/2"
Bolt hole to bolt hole: 5.354 in. (136mm)
Overall length: 7.25 in. (184mm)
Shaft height: 1.937 in. (49.2mm)
Overall height: 3.858 in. (98mm)
Bolt hole: .669 in. (17mm)