Shop By Category
- ATV Bearings
- Pillow Block Bearings
- 2-Bolt Flange Bearings
- 3-Bolt Flange Bearings
- 4-Bolt Flange Bearings
- Take-up Bearings
- Insert Bearings
- Bearing Housings
- Radial Ball Bearings
- Special Agricultural Bearings
- Disc Harrow Bearings
- Tapered Roller Bearings
- Linear Ball Bearings
- Ball Transfer Units
- Oil Seals
- Rod Ends
- Roller Chain Parts
- Shafting
- Shaft Couplers
- Shaft Collars
- Gearboxes
- V-Belts
- Linear Actuators
- Clutch Release Bearings
- Special Sale
- Washing Machine Bearing Kits
Description - 40 HP Right Angle Bevel Gearbox With 3 Keyed Shafts 1:1
Description:
Right angle gearbox with three 1" keyed shaft. Cast iron housing is sealed to protect the gears and taper roller bearings. The body is drilled and tapped 4-1/4" square with 3/8" holes. Ships without oil (1/3 qt of 80-90 W)
Gearbox is drilled and tapped with the same bolt pattern on both sides of the gearbox. This allows you to mount and arrange the shafts the way you need them. Input shaft turning clockwise will make one output shaft turn clockwise and the other turn counterclockwise (CW/CW/CCW).
Technical Information:
| Dimensions: | 5-7/8" x 6-1/2" x 4-1/8" |
| Bolt Pattern: | 4-1/4" Square with 3/8" Tapped Holes |
| Input Shaft: | 1" X 2-1/4" with 1/4" Keyway |
| Output Shaft: | 1" X 2-1/4" with 1/4" Keyway (Both) |
| Input Power: | 40 HP |
| Input Speed: | 1,800 Max RPM |
| Shaft Rotation: | CW to CW/CCW with 1:1 Ratio |
